How To Install Commercial Electric Light Fixture

Commercial Electric 5 in & 6 in LED Colour Changing Recessed Trim User Guide

Item # 1004 399 132
Model # NS01RA13FR12591
Detail # 1004 399 313
Model # NS01RA13FR12592

5 in & six in LED Colour Changing Recessed Trim with Smart Low-cal Switch

Questions, issues, missing parts? Earlier returning to the store, call Commercial Electrical Client Service
8 a.m. – vii p.m., EST, Monday – Friday
9 a.grand. – half-dozen p.m., EST, Saturday

i-877-527-0313

HOMEDEPOT.COM

THANK Y'all
We appreciate the trust and conviction yous have placed in Commercial Electric through the purchase of this LED light. We strive to continually create quality products designed to raise your abode. Visit us online to run across our total line of products available for your dwelling house improvement needs. Give thanks y'all for choosing Commercial Electrical!

Safe Information

Alarm: Carefully read and sympathise the information given in this transmission earlier beginning the assembly and installation. Failure to exercise and then could lead to electric shock, fire, or other injuries which could be hazardous or fifty-fifty fatal.

Alarm: Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or plow off the circuit breaker.

WARNING: Risk of fire or electric shock. Installation of this LED Retrofit Kit assembly requires a person familiar with the construction and operation of the light fixture'southward/luminaire's electrical organization and the hazard involved. If non qualified, do not effort installation. Contact a qualified electrician.

WARNING: Install this kit merely in luminaires (lite fixtures) that take the construction features and dimensions shown in the photographs and/or drawings included in these installation instructions, and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.

WARNING: Do not brand or change whatever open up holes in an enclosure of wiring or electrical components during kit installation.

WARNING: To foreclose wiring impairment or chafe, Exercise NOT betrayal the wiring to canvas metal edges or other sharp objects.

WARNING: Not intended for utilize with emergency exit fixtures or emergency exit lights. Suitable for wet locations.

WARNING: Used batteries should be disposed of at an appropriate recycling middle. Practise not discard with normal housedhold trash. Exercise NOT BURN.

Alarm:

• Only use the control provided with or specified past these instructions to control this lamp.
• This lamp will not exist operate properly when connected to a standard (incandescent) dimmer or dimming control.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user'due south authority to operate the equipment.

CAUTION: Risk of electrical shock. Practise not open up. There are no user serviceable parts within. Turn the power off before inspection, installation, or removal. The lamp is suitable for use in wet locations. Apply only on 120 VAC, 60 Hz circuits.

NOTICE: Each light shall be installed but in its intended style and orientation. Not all existing recessed cans that meet these requirements volition be compatible with Commercial Electric recessed LED Trim. To ensure compatibility, a test installation should be conducted. The minimum starting temperature is -4 °F.

Discover: This device complies with part 15 of the FCC rules. Performance is field of study to the following two conditions:

• This device may not cause harmful interference, and
• This device must take any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Course B digital device, pursuant to Part xv of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and tin can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will non occur in a particular installation. If this equipment does cause harmful interference to radio or television set reception, which can be adamant by turning the equipment off and on, the user is encouraged to try to correct the interference by i or more of the post-obit measures:

• Reorient or relocate the receiving antenna.
• Increment the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dissimilar from that to which the receiver is continued.
• Consult the dealer or an experienced radio/TV technician for assist.

Zigbee

Wireless Protocol: Zigbee iii.0. This device is fully Zigbee three.0 certied.

Warranty

FIVE-YEAR Limited WARRANTY

The manufacturer warrants this lighting fixture to be gratuitous from defects in materials and workmanship for a flow of v (5) years from engagement of purchase. This warranty applies only to the original consumer purchaser and but to products used in normal apply and service. If this product is found to be lacking, the manufacturer'south simply obligation, and your exclusive remedy, is the repair or replacement of the production at the manufacturer'due south discretion, provided that the production has non been damaged through misuse, abuse, blow, modifications, alterations, neglect, or mishandling.

WHAT IS Non COVERED

This warranty shall non apply to any product that is found to have been improperly installed, gear up-up, or used in any mode not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product equally a upshot of an accident, misuse, abuse, negligence, alteration, faulty installation, or whatever other failure not relating to faulty material or workmanship. This warranty shall not use to the finish on any portion of the production, such as surface and/or weathering, every bit this is considered normal wear and tear.

The manufacturer does non warrant and specifically disclaims any warranty, whether limited or implied, of fitness for a item purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for whatsoever consequential or incidental loss or damage, including simply not limited to whatsoever labor / expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at one-877-527-0313 or visit world wide web.HomeDepot.com

Pre-Installation

PLANNING INSTALLATION

Before beginning assembly, installation or functioning of product, make certain all parts are nowadays. Compare parts with the package contents listing. If any part is missing or damaged, do not attempt to get together, install or operate the production. Contact customer service for replacement parts.

Alarm: Close off the power at the excursion breaker or fuse panel before removing the erstwhile fixture.

Notation: Go on your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

PACKAGE CONTENTS

REMOTE CONTROL INTRODUCTION

LED Downlight Installation

1. Preparing the LED Downlight
2. Preparing the Installation Location and Compatible Housing
3. Connecting the Socket Adapter
   • Screw the medium base of operations (E26) socket adapter (B) into the socket in the recessed housing.
     
4. Connecting the Cables
   • Insert the orange female connector of the LED downlight (A) into the orange male connector on the socket adapter (B) screwed into the uniform housing.
     
5. Finishing the Installation
   • Squeeze both torsion spring arms together and insert into the torsion bound slots of the can. Tuck all wires into the can and advisedly push the LED downlight (A) into the tin.
     

Installation Using Shallow Housings

NOTE: Before kickoff assembly, bank check for a compatible shallow tin first.

1. Preparing the Installation Location and Shallow Housing
   • Remove the existing trim and bulb from the housing.
     
2. Adjusting Shallow Housing
   • Unscrew the fly nut inside the housing to detach the socket bracket from the can.
   • Disengage the socket from the socket bracket.
     
3. Connecting the Socket Adapter
   • Spiral the medium base of operations (E26) socket adapter (B) into the socket in the recessed housing.
     
4. Finishing the Installation
   • Insert the orange female person connector on the LED downlight (A) into the orange male connector on the socket adapter (B) screwed into the compatible housing.
   • Push the downlight (A) into the housing and insert the friction blades into the slots inside the housing. Tuck all of the wires into the housing and carefully button the downlight (A) into the housing.
     

Installation Using Non-Edison Base of operations Socket LED Housings

1. Installing the Downlight
   • Insert the orange female person connector on the LED downlight into the orange male connector on the socket adapter screwed into the compatible housing. Tilt the downlight while inserting the torsion springs into the brackets on the housing.
     
2. Finishing the Installation
   • Tuck all of the wires into the housing and carefully button the downlight into the housing.
     

Remote Control Bracket Installation

Decide upon your placement position and attach the remote command subclass with either mounting screws sets or double-sided adhesive tape.

1. Using Mounting Screws Sets
   • Insert flat bract screwdriver into grove (MM) to separate 2 parts of the subclass.
     Screw in the hole to set the the back side on the wall or other firm surface demanding the thickness more than than 1 inch. Two magnets (NN) are used to magnetize the remote control every bit below.
     
2. Using Double-Sided Adhesive Tape
   • Peel off the agglutinative liner (PP) and attach the bracket (Due east) to the wall or other house surface as you like.
     

Notation: To avoid radio signal interference, do not install the remote bracket outdoors, nearly large metal objects and mirrors.

Operation

Prepare the Remote Control

NOTE: Battery will weaken with age and should be replaced before leaking takes place as this will damage the remote command. Dispose of used batteries properly and keep them out of the reach of the children.

Remove the plastic battery strip (FF) beneath the battery covering (JJ).
The remote command and downlights in the pack are paired at the factory.

1. Operating the Downlight with the Remote Control

ON/OFF

• Press the ON/OFF button (BB) to turn the light ON or OFF.

Dimming

CCT Tunable

Memory

Annotation: The new mode volition replace the terminal setting yous executed, as the remote control tin can only keep 3 modes at most in its memory.

If additional downlights are needed to be paired with a remote control non purchased in its pack, earlier performance, proceed to Stride two to unpair the downlight and Footstep 3 to pair with the downlight with the preferred remote.

2. Unpair the Downlight

Position the remote control (E) within ii inches of the downlight.

NOTE: But one downlight volition be unpaired at a time. To unpair all the downlights simultaneously, reset all the downlights and remote control by following the instructions in the mill default section of the instructions.

3. Linking with the Remote Control

NOTE: Afterwards removing the Plastic Battery Strip(FF), indicator Light (AA) will begin to glimmer indicating the ability is on.

To link the downlight to the remote control, follow the steps below called Touch-Link.

Touch on-Link.

• Energize the power for the downlight and position the remote inside 2 inches of the downlight. Press and agree the ON/OFF button ?? (BB) and Dimming push ?? (CC) at the same time for 3 seconds. The indicator lite (AA) will begin to wink.
  
• The remote control (D) will start to search for the downlight (A). The indicator light (AA) will wink rapidly until the downlight (A) is detected.
• During the linking procedure, the downlight (A) volition flash three times. The indicator light on the remote control (D) volition remain on for iii seconds. This indicates that the downlight (A) and remote command (D) accept been successfully linked.

Note:

1. To link an additional downlight, follow the instructions above. The existing linked downlight may glimmer. If this occurs, press whatsoever button on the remote to finish the blinking. Then proceed with repeating the linking procedure.
2. Ane remote control controls upwards to 20 downlights.

Factory Default

• To reset the remote command (D), insert the reset pin (F) into the reset button pin pigsty (GG) and hold for three seconds. This will reset the remote control without removing the battery cover (JJ).
• To reset the downlight (A), flip the power switch on and off vi times.

Low Power Notification and Replacing the Battery

• The indicator low-cal (AA) volition glimmer twice fast indicating that the battery is low.
• To replace the bombardment, remove the battery encompass (JJ) with a screwdriver.
• Employ a flat head screwdriver to remove the bombardment (HH) and supercede with a new 3V CR2450 battery (HH).
• Replace the bombardment cover (JJ) on the remote control (D) and tighten the screws (2).

Intendance & Cleaning

CAUTION: Earlier attempting to make clean the fixture, disconnect the power to the fixture by turning the billow off or removing the fuse from the fuse box.

• Clean the fixture with a soft, dry material.
• Practice non use cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

WARNING: Before doing any piece of work on the fixture, disconnect ability to the low-cal fixture by turning the breaker off or removing the fuse from the fuse box.

Troubleshooting

Light Distribution

Compatibility

FOR Utilize WITH HOUSING MODELS:

COMMERCIAL Electrical – HBR5ICAT, HBR5ICRAT, CAT7ICATA, CAT71CRM; CORDELIA – X5LICT, X5LICRAT, HBR7LICAT, HBR7LICRAT; CAPRI – CRI, CRR1; DMF – DH6ICATQ, DH6ICRATQ; ELCO – EL5ICA, EL5RICA; ELITE – B5, B5R, B5IC, B5RIC, B6IC, B6RIC; LITHONIA – L5, L5R, EL7ICA, EL7RICA, L7X, L7XR; NORA – NHIC-17QAT, NHRIC-17QAT; Ocean Gull- RETROFIT TRIM 11018, 11028; THOMAS – PS1, PS1-RM; ALLPRO-APEI700AT; HALO-H5T, H5RT, H5ICT, H5RICAT, C7IC, C7ICR, C7ICA, C7ICRA, C7, C7R, C7S, HBR5000SIC; HALO – H7ICT, H7RICT, H7ICAT, H7RICAT, H7T, H7RT, H27ICT, H27T, H27RT, H550ICAT, H550RICAT, H750ICAT, H750RICAT.

FOR Apply WITH SHALLOW HOUSINGS:

HALO-H27ICAT; LITHONIA-L7XP

FCC compliance information is listed as below:
Responsible party: Leedarson America, Inc.
Responsible political party address: 300 Applied science Courtroom SE Suite 100, Smyrna, GA 30082
Telephone number: (678) 293-8382

Questions, problems, missing parts? Earlier returning to the store,
call Commercial Electric Customer Service
eight a.one thousand. – seven p.m., EST, Monday – Friday
9 a.thousand. – vi p.m., EST, Saturday

i-877-527-0313

HOMEDEPOT.COM

Retain this manual for futurity use.

Documents / Resource

Source: https://manuals.plus/commercial-electric/5-in-6-in-led-color-changing-recessed-trim-with-smart-light-switch-manual

Posted by: freelandhictoundile1959.blogspot.com

Share this post